Product Parameters
| PL-5050P LCD screen model |
| Technical specification |
Nozzle models available |
Nozzle treatment area |
Model |
| Interface display |
4.3-inch LCD screen without touch |
R17 Rotate nozzle 16 |
16mm |
PL-JX-022-1 |
| Rated supply voltage |
AC220V ±10% |
R03 Rotary nozzle 20 |
20mm |
PL-JX-004-1 |
| Plasma output power |
750-1500W |
R04 Rotary nozzle 30 |
30mm |
PL-JX-006-1 |
| Input current |
4.0-8.0A |
R21 Rotary nozzle 40 |
40mm |
PL-JX-008-1 |
| Supply frequency |
17.3-30kHz |
R05 Rotary nozzle 50 |
50mm |
PL-JX-010-1 |
| Air source requirement |
External air source (gas consumption 60L/min |
R23 Rotate nozzle 70 |
75mm |
PL-JX-014-1 |
| Air source input pressure |
≥0.6Mpa |
R19 Rotary nozzle 85 |
85mm |
PL-JX-016-1 |
| Air pressure operating range |
0.1-0.3Mpa |
R20 Rotary nozzle 100 |
110mm |
PL-JX-018-1 |
| Mode |
Signal Mode/ Encoder Mode |
|
|
|
| Relative humidity |
<93% |
 |
| Storage temperature |
-25ºC-+55ºC |
| Cleaning height |
5-15mm |
| Treatment width |
≤110mm |
| Bracket |
Dovetail support |
| Chassis dimensions (including components) |
590(L)*350(W)*365(H)mm |
| Net weight |
28kg |
| Dimensions of the outer packing box |
660(L)*395(W)*530(H)mm |
| Gross weight |
37kg |
| Detection function |
Air pressure detection, overtemperature detection, motor speed detection, driver fault detection |
| Fault alarm |
Undercurrent, input overcurrent, output overcurrent, abnormal air pressure, driver fault ALARM output, motor speed abnormal ALARM output |
Plasma Surface Treatment for Lithium Battery Packs:
Enhancing Performance and Safety
Lithium (Li-on) batteries are the backbone of the electrification
revolution, enabling advancements in clean energy, mobility, and
smart technology.
Lithium-ion batteries are ubiquitous in modern technology due
to their high energy density, lightweight design, rechargeability,
and long cycle life.
Improving battery performance we want to highlight how
advancements in battery technology - like Plasma Surface
Treatments - enable these applications.
Overview
Plasma surface treatment, utilizing ionized gas to modify material surfaces, is emerging as a transformative
technique in lithium battery manufacturing. By altering surface properties at the nanoscale, plasma
treatment addresses key challenges in battery performance, safety, and longevity.
Key Applications and Benefits by Component
1. Electrodes
o Adhesion Improvement: Plasma treatment of metal foils (Al for cathode, Cu for anode)
enhances surface energy, promoting better adhesion of active materials (e.g., LiCoO,
graphite). This reduces delamination, ensuring stable charge/discharge cycles.
o SEI Layer Stability: Functionalizing carbon-based anodes with oxygen plasma introduces
oxygen groups, fostering a robust Solid Electrolyte Interphase (SEI) layer, which minimizes
capacity fade and inhibits dendrite growth.
2. Separators
o Wettability and Porosity: Plasma etching (e.g., using Ar or O) increases hydrophilicity
and porosity in polyolefin separators, improving electrolyte uptake and ion transport.
o Thermal Stability: Crosslinking polymer surfaces via plasma can enhance thermal
resistance, mitigating risks of thermal runaway.
3. Casing and Seals
o Surface Cleaning: Plasma treatment ensures contaminant-free surfaces for casing materials
(Al, steel), Improving seal integrity and preventing electrolyte leaks.Process Considerations
• Parameters: Gas type (O, N, Ar), power, pressure, and treatment time are tailored to each
component. For example, low-pressure O plasma may optimize separator wettability, while
atmospheric plasma suits roll-to-roll electrode processing.
• Scalability: Inline atmospheric plasma systems enable integration into existing manufacturing lines,
though uniformity and cost-effectiveness require optimization.
Case Studies and Performance Metrics
• Anode Treatment: Studies and customer applications show plasma-treated graphite anodes exhibit
15-20% higher capacity retention after 500 cycles.
• Separator Modification: Plasma-etched separators demonstrate 30% faster electrolyte absorption,
enhancing rate capability.
Comparison to Alternatives
Plasma treatment offers eco-friendly, dry processing versus wet chemical methods. It provides precise
control over surface chemistry compared to mechanical abrasion.
Plasma surface treatment is indispensable in modern lithium battery manufacturing, addressing critical
challenges in adhesion, contamination, and material performance. For specific technical specifications,
collaborate with Keylink Technology to test your material under controlled conditions.
We are specialized in Atmospheric and Low Temperature applications and offer a wide range of standard
and customized solutions to improve the performance of your batteries.
Company Profile
Certifications
Exhibition
Packaging & Shipping
FAQ
1. What is the shipping warehouse location?
Answer:Our main shipping warehouse is located in Zhejiang, China, and we ship globally via trusted logistics partners. We also accommodate customer-preferred shipping methods or carriers.
2.What is the production lead time?
Answer:Lead time varies based on order size and product type:
- For small to medium orders (e.g., 10-20 machines), the lead time is approximately 3-4 workdays.
- We expedite production to meet tight deadlines whenever possible, especially before holidays like the Spring Festival.
3.Can I customize my order (e.g., specific configurations or spare parts)?
Answer:Yes, customization is available! We can tailor machine configurations, spare parts, and accessories (e.g., nozzles or cable lengths) based on your specific requirements. Please share your customization needs during the order confirmation process.
4.What are the payment terms?
Answer:We offer flexible payment terms, including:
- Full payment before shipping
- 50% deposit upon order confirmation.
- Remaining balance before shipment.
Payments are typically made via SWIFT transfer. For long-term partners, we can explore customized payment plans based on mutual agreement.
5.What kind of after-sales support do you provide?
Answer:We offer comprehensive after-sales support, including:
- Technical Assistance: Troubleshooting via email, phone, or video calls.
- Spare Parts: Quick access to replacement parts for machines under warranty or through spare part orders.
- Documentation: User manuals, maintenance guides, and troubleshooting SOPs for all products.
- On-Site Support: For critical issues, we can dispatch technicians to your location (subject to availability and agreement).
Audited Supplier 
){kind=link}