Product Parameters
| PL-5050H (old big case) |
| Technical specification |
Nozzle models available |
Nozzle treatment area |
Model |
| Interface display |
Three and a half LED digital tube |
R17 Rotate nozzle 16 |
16mm |
PL-JX-022-1 |
| rated supply voltage |
AC220V ±10% |
R03 Rotate nozzle 20 |
20mm |
PL-JX-004-1 |
| Plasma output power |
1000VA |
R04 Rotate nozzle 30 |
30mm |
PL-JX-006-1 |
| Input current |
4.0-6.0A |
R21 Rotate nozzle 40 |
40mm |
PL-JX-008-1 |
| Supply frequency |
20kHz |
R05 Rotating nozzle 50 |
50mm |
PL-JX-010-1 |
| Air source requirement |
External air source (gas consumption 60L/min |
R23 Rotate nozzle 70 |
75mm |
PL-JX-014-1 |
| Air source input pressure |
≥0.6Mpa |
|
|
|
| Air pressure operating range |
0.1-0.25Mpa |
|
|
|
| Mode |
Signal Mode/ Encoder Mode |
|
|
|
| Relative humidity |
<93% |
 |
| Storage temperature |
-25ºC-+55ºC |
| Cleaning height |
5-15mm |
| Treatment width |
≤75mm |
| Bracket |
Dovetail support |
| Chassis dimensions (including components) |
690(L)*280(W)*485(H)mm |
| Net weight |
26kg |
| Dimensions of the outer packing box |
795*345*540mm |
| Gross weight |
33kg |
| Detection function |
Air pressure detection, overtemperature detection, undercurrent detection |
| Fault alarm |
Undercurrent, input overcurrent, output overcurrent, abnormal air pressure |
PET (polyethylene terephthalate) foils are used in various industries due to their strength, transparency, chemical resistance, and barrier properties. Their versatility and recyclability make them ideal for both everyday and specialized applications.
Applications of PET Foils in Printing
Here's a structured overview of their applications where printing is commonly necessary:
1. Packaging
- Food Packaging: Used for snack bags, wrappers, and metallized films to provide moisture, oxygen, and aroma barriers.
- Pharmaceuticals: Blister packs and sterile packaging that protect against moisture and contamination.
2. Electronics
- Insulation Films: Serve as protective layers in cables, capacitors (as dielectric films), and flexible printed circuits.
3. Printing & Labels
- Durable Labels: Common in product labels, electronics, and machinery due to high tear resistance.
- Lamination Films: Applied to documents, ID cards, and credit cards.
- Graphic Arts: Banners, decals, and holograms benefit from PET's printability and durability.
4. Automotive
- Protective Films: Used for paint protection and decorative interior foils.
5. Medical
- Sterile Packaging: Ensures the safety and longevity of medical devices.
6. Industrial
- Release Liners: Act as carriers for adhesives and composites.
7. Textiles
- Laminated Fabrics: Create waterproof and weather-resistant materials for outdoor gear.
8. Specialty Applications
- 3D Printing: Used as substrates or support materials.
- Arts & Crafts: Stencils and transparent overlays.
The Challenge of Printing on PET Foils
Printing on PET can be tricky because of its low surface energy. To enhance printing quality on PET foils using plasma surface treatment, follow this structured approach tailored to optimize ink adhesion and print durability:
1. Plasma Type and Gas Selection
Oxygen Plasma
- Introduces polar functional groups (-OH, -COOH) to increase surface energy.
- Improves wettability, especially for water-based and solvent-based inks.
Nitrogen or Argon Plasma
- Enhances cross-linking or provides mild etching for mechanical interlocking.
- Particularly useful for UV-curable inks.
Mixed Gases (e.g., O + Ar)
- Combines chemical activation with physical etching.
- Tailors surface roughness to optimize ink anchoring.
2. Key Parameters Optimization
- Power: Low for atmospheric plasma; high for vacuum systems.
- Treatment Time: Shorter for atmospheric systems to maintain speed.
- Pressure:
- Vacuum plasma: 0.1-1 mbar for uniform treatment.
- Atmospheric plasma: Operates at ambient pressure for inline processing.
- Distance: Adjust based on plasma source and PET material to ensure uniformity and heat control.
3. Equipment Considerations
Atmospheric Plasma
- Ideal for high-speed roll-to-roll printing (e.g., packaging and labels).
Low-Pressure Plasma
- Suitable for precision treatment in electronics or medical packaging.
Plasma Jet Arrays
- Ensure uniform treatment across wide-format PET foils.
4. Surface Activation
Chemical Modification
- Adds polar groups that increase surface energy (target contact angle < 40°).
- Enhances ink wetting and adhesion.
Physical Etching
- Introduces nano-scale roughness (10-50 nm Ra) for better mechanical ink bonding.
Cleaning
- Removes oils, additives, or dust that hinder adhesion.
5. Post-Treatment Handling
- Immediate Printing: Print within 15-60 minutes to avoid hydrophobic recovery.
- Storage: Store in dry, inert environments (e.g., nitrogen atmosphere) if printing is delayed.
- Primers: Use adhesion promoters (e.g., silanes) for long-term durability.
6. Characterization and Validation
- Contact Angle Measurement: Aim for < 40° for water to confirm hydrophilicity.
- Ink Adhesion Tests:
- Tape Test (ASTM D3359) for peel resistance.
- Abrasion resistance tests (e.g., Sutherland Rub Tester).
- Surface Analysis:
- XPS/FTIR for oxygen-functional group verification.
- AFM to measure roughness (target Ra 10-50 nm).
7. Industrial Implementation Tips
- Uniformity: Use rotating electrodes or multi-jet arrays in roll-to-roll systems.
- Ink Compatibility:
- Water-based inks: Hydrophilic surfaces.
- Solvent/UV inks: Moderate roughness enhances anchoring.
- Pre-Treatment Cleaning: Use ionized air or mild solvents (like isopropyl alcohol) to remove dust and static.
8. Troubleshooting Common Issues
Poor Ink Adhesion
- Increase plasma power/time.
- Consider switching to oxygen plasma.
- Check for surface contamination.
Over-Treatment
- Reduce plasma power/time if PET becomes brittle or discolored.
Ink Spreading Issues
- Optimize surface energy to match ink viscosity and flow behavior.
By precisely optimizing plasma surface treatment parameters and integrating them into your production line, you can significantly improve ink adhesion and print durability on PET foils. This enables vibrant, long-lasting prints while maintaining production efficiency.
Partner with Keylink Technology
Keylink Technology specializes in atmospheric and low-temperature plasma systems. We offer both standard and custom solutions tailored to your PET printing needs. Contact us to test your materials and elevate your print quality with expert surface treatment solutions.
Company Profile
Certifications
Packaging & Shipping
FAQ
1. What is the shipping warehouse location?
Answer:Our main shipping warehouse is located in Zhejiang, China, and we ship globally via trusted logistics partners. We also accommodate customer-preferred shipping methods or carriers.
2.What is the production lead time?
Answer:Lead time varies based on order size and product type:
- For small to medium orders (e.g., 10-20 machines), the lead time is approximately 3-4 workdays.
- We expedite production to meet tight deadlines whenever possible, especially before holidays like the Spring Festival.
3.Can I customize my order (e.g., specific configurations or spare parts)?
Answer:Yes, customization is available! We can tailor machine configurations, spare parts, and accessories (e.g., nozzles or cable lengths) based on your specific requirements. Please share your customization needs during the order confirmation process.
4.What are the payment terms?
Answer:We offer flexible payment terms, including:
- Full payment before shipping
- 50% deposit upon order confirmation.
- Remaining balance before shipment.
Payments are typically made via SWIFT transfer. For long-term partners, we can explore customized payment plans based on mutual agreement.
5.What kind of after-sales support do you provide?
Answer:We offer comprehensive after-sales support, including:
- Technical Assistance: Troubleshooting via email, phone, or video calls.
- Spare Parts: Quick access to replacement parts for machines under warranty or through spare part orders.
- Documentation: User manuals, maintenance guides, and troubleshooting SOPs for all products.
- On-Site Support: For critical issues, we can dispatch technicians to your location (subject to availability and agreement).
Audited Supplier 
){kind=link}